Click HERE to purchase the new handlebar grip.

ATTENTION: If you cannot install the part correctly, and follow these steps safely, we suggest you find a certified bike mechanic for assembly, maintenance and repair.

Tools&Parts : the new handlebar grip, a cup of hot water, syringe



1. Remove the handlebar grip covers by hand.

2. Use a syringe to inject the water between the handlebar and grip for lubrication.
3. Rotate the grip firmly to remove it, if it is still difficult to remove the grips, continue to inject water until the grips are removed.
4. Before you install the new grips in the handlebar, first put them in hot water for a few minutes, then put some water on the handlebar, so they will be installed easily.
5. The shorter grip is installed on the right side of the handlebar and the longer grip is installed on the left side of the handlebar, then install the grip covers.



1. Check that the right and left grips are installed correctly, the shorter grip is intalled on the right side of the handlebar.

2. Check that the handlebar grips are installed tightly, because it will be very dagerous during riding if the grips are not fixed firmly. 

You have successfully subscribed!
This email has been registered